To owner-build in the ACT you need an owner-builder licence for any work that needs building approval. There is no dollar threshold. To get the licence you need an owner-builder course certificate from the last five years (or an active ACT class A, B or C builder licence) and a copy of your building approval. The licence covers only class 1, class 2 or class 10a buildings that are, or will be, your main home or ancillary to it. Applications take at least four weeks and are not fast-tracked. Source: ACT Planning, owner-builder licence.
Owner Builder ACT – Complete Guide
This guide sets out the ACT owner-builder rules as published by the ACT Government, the approvals a new home or granny flat needs, and how a steel frame kit home fits into an owner-builder project in Canberra and the surrounding region.
Owner Builder Requirements in ACT
| Requirement | ACT rule |
|---|---|
| When you need a licence | For building work that requires building approval. No dollar threshold applies. |
| Licence classes | One class of owner-builder licence |
| Buildings covered | Class 1, class 2 or class 10a buildings that are, or will be, your main home or ancillary to it (for example a carport, deck or pergola) |
| Not covered | Specialist building work such as demolition or swimming pool construction |
| Qualification | Owner-builder course completed within the last five years, or an active ACT class A, B or C builder licence |
| Documents | Course certificate (or builder licence) and a copy of the building approval |
| Safety training | Construction induction (white card) training for you and your workers, and asbestos awareness training |
| Assessment time | At least four weeks; no fast-tracking |
| Residential building insurance | Not required for owner-builders |
Sources: ACT construction licences and owner-builder responsibilities.
How to Apply for ACT Owner Builder Licence
Step 1: Complete Training
Complete an approved owner-builder course, plus construction induction and asbestos awareness training. The course certificate must be less than five years old when you apply.
Step 2: Obtain Development Approval Where Needed
Check whether your project needs development approval under the Territory Plan. Many new homes do; some single dwellings that meet the Territory Plan rules may be exempt. Your certifier or ACT Planning can confirm which applies to your block.
Step 3: Engage a Building Certifier
A licensed building certifier assesses your plans and engineering and issues the building approval. You need a copy of the building approval for your licence application.
Step 4: Apply for the Licence
Lodge the individual owner-builder application form with the course certificate, the building approval and the fee. The application is not submitted until the documents are lodged and the fee is paid.
Step 5: Arrange Your Other Insurance
Owner-builders do not need residential building insurance, but you control the site, so check workers’ compensation for anyone working for you, public liability, and your house insurance.
ACT Building Approvals
The ACT separates planning from building:
Development Approval (DA)
Planning approval that checks your building against the Territory Plan: block coverage, setbacks, height and design requirements.
Building Approval (BA)
Technical approval from a building certifier that checks the building against the National Construction Code and Australian Standards. The ACT adopted NCC 2025 on 1 May 2026, and NCC 2022 is still accepted for approvals until 1 May 2027 (ABCB adoption information).
Your Responsibilities as an ACT Owner Builder
An ACT owner-builder takes on the same responsibilities as a licensed builder. You must make sure the work complies with the Building Act 2004, is done in a proper and skilful way and follows the approved plans. You are legally responsible for the work you do or supervise, and you can be given a rectification order to fix non-compliant work even after the property has been sold.
Supply and Delivery to ACT
BRIbuild steel frame kits are supplied to Canberra and the surrounding region through our national supply network. Delivery is quoted with your kit, based on its size and your address. The kit is the structure only: steel subfloor where used, wall frames, roof trusses and engineering. Windows, doors, cladding, roofing, insulation and flooring are supplied separately.
ACT Areas We Service
Canberra Suburbs
All Canberra districts – Belconnen, Gungahlin, North Canberra, South Canberra, Woden Valley, Weston Creek, Tuggeranong, Molonglo Valley
Surrounding NSW
Queanbeyan, Bungendore, Braidwood, Yass, Murrumbateman, Gundaroo, Collector. These towns are in NSW, so NSW owner-builder rules (NSW Fair Trading) and NSW council approvals apply, not the ACT licence.
ACT Building Considerations
Cold Climate and Energy Rating
Canberra is in a cool climate zone, so insulation, glazing and air sealing matter. New houses approved under NCC 2022 or NCC 2025 need a minimum 7-star NatHERS rating (or another compliance pathway). The rating comes from the whole design, not the frame, so your assessor rates the house with your chosen insulation and windows.
Bushfire Risk
If your block is in a bushfire prone area, the certifier will need a bushfire attack level (BAL) assessment under AS 3959. Our steel frame kits can be engineered for every BAL level up to BAL-FZ; the rest of the building (cladding, windows, roofing) must also meet the BAL.
Frost and Snow
Steel frames do not shrink, warp or rot in cold, damp conditions. Your engineer designs the frame and roof for the wind and snow loads that apply to your site.
Termites
Steel frames cannot be eaten by termites. The NCC termite management rules still apply to timber elements elsewhere in the building, so check them with your certifier.
Popular ACT Owner Builder Projects
New Family Homes
Steel frame kit homes in Canberra’s growth suburbs – Gungahlin, Molonglo, Denman Prospect, Taylor, Whitlam
Knockdown Rebuilds
Replacing older homes in established suburbs. Demolition is specialist building work, so it must be done by a licensed contractor, not under the owner-builder licence.
Granny Flats
Secondary residences on existing blocks, where the Territory Plan allows them. A secondary residence built as an owner-builder must be ancillary to your main home.
Rural Properties
Acreage properties around Canberra – Hall, Pialligo, Symonston, and surrounding NSW areas
Why ACT Owner Builders Choose Steel Frame
- Non-combustible framing – steel frames can be engineered for every BAL level up to BAL-FZ
- Dimensionally stable – no shrinkage or warping in frost and damp conditions
- Termite resistant framing – termites cannot eat steel
- Engineered kit – frames and trusses arrive engineered for your site, ready for your certifier
- Owner-builder support – we assist you with drafting, council planning and DA, and building permits
Browse Kit Home Designs
View steel frame kit home designs at Kit Home Floor Plans, or explore options at Steel Frame Kit Homes.
FAQs: Owner Builder ACT
Is there a dollar threshold for an owner-builder licence in the ACT?
No. In the ACT you need an owner-builder licence for building work that requires building approval, whatever its value. This is different from NSW, Victoria and Queensland, which set dollar thresholds.
What course do I need to owner-build in the ACT?
You need an approved owner-builder course completed within the five years before you apply, or an active ACT class A, B or C builder licence. You also need construction induction and asbestos awareness training.
Can I owner-build an investment property in the ACT?
No. The ACT owner-builder licence covers class 1, class 2 or class 10a buildings that are, or will be, your main home or ancillary to it.
Do ACT owner-builders need home warranty insurance?
No. ACT owner-builders do not need residential building insurance. You are still legally responsible for the work and can be given a rectification order to fix non-compliant work even after you sell.
How long does an ACT owner-builder licence take?
Assessment takes at least four weeks, and longer if the application is incomplete or more information is requested. Applications are not fast-tracked.
Get Started in ACT
Ready to discuss your Canberra owner builder project? Contact us for a consultation.